mdadm – /dev/md127
4July 6, 2012 by aubreykloppers
This is just a placemark. I found /dev/md0 not being built correctly after a crash. All I needed to do was a:
update-initramfs -u
and then when getting: “mdadm: unchecked config file” error just delete the:
rm /var/lib/mdadm/CONF-UNCHECKED
file.
Now, if you still do not get the raid array mounting on /dev/md0, but still on /dev/md127 do the following:
Find the mounted array:
- df -kh
Then unmount the /dev/md127 device:
- umount /dev/md127
Then stop the array:
- mdadm -S /dev/md127
Then re-assemble the array:
- mdadm –assemble –scan
Then check the array:
- mdadm –detail /dev/md0
Once completed, do a:
fsck /dev/md0
and make sure everything is ok.
why this is happen ?
LikeLike
[…] I'm also confused, but read this post: https://aubreykloppers.wordpress.com/…dadm-devmd127/ […]
LikeLike
Because for error on RAID…
LikeLike
delete thist
rm /var/lib/mdadm/mdadm.conf-generated
LikeLike